Get free quotes

Free tool

Tyre pressure in psi, bar and kPa

Placards, pumps and gauges do not always use the same unit. Type a pressure in any unit and see it in the other two.

A tyre pressure sensor and valve next to an alloy wheel

Convert a pressure

The same pressure

psi
–
bar
–
kPa
–
Kilograms per cm² (old gauges)
–

Set the pressure cold, to the figure on the placard, not the maximum on the sidewall.

South African placards usually show tyre pressure in kPa or bar, and many garage pumps and handheld gauges show psi or bar. One bar is 100 kPa, or about 14.5 psi. The converter does the sum for you, and the notes below cover the mistakes that cost the most tyres.

Charts

Pressure chart, 20 to 50 psi
psibarkPa
20 psi1.38 bar138 kPa
22 psi1.52 bar152 kPa
24 psi1.65 bar165 kPa
26 psi1.79 bar179 kPa
28 psi1.93 bar193 kPa
30 psi2.07 bar207 kPa
32 psi2.21 bar221 kPa
34 psi2.34 bar234 kPa
36 psi2.48 bar248 kPa
38 psi2.62 bar262 kPa
40 psi2.76 bar276 kPa
42 psi2.90 bar290 kPa
44 psi3.03 bar303 kPa
46 psi3.17 bar317 kPa
48 psi3.31 bar331 kPa
50 psi3.45 bar345 kPa

Checking pressure the right way

  • Check cold: before driving or after the car has stood for a while. Pressure rises as the tyre warms up, so a hot reading looks higher than it is. Never let air out of a hot tyre to bring it down to the cold figure.
  • Use the placard, not the number on the sidewall. The sidewall figure is the maximum the tyre can take, not the pressure for your vehicle.
  • Load and towing: most placards give a higher pressure for a full load or towing. Use it.
  • Check monthly and before a long trip, including the spare.

Gravel and sand

4x4 drivers often lower pressures on sand or rough gravel for grip and comfort, then pump them back up before driving at speed on tar. A lower pressure makes the sidewall flex more and heat up, so speed has to come down with it. Carry a reliable gauge and a compressor, and a tyre repair kit for the far places.

When pressure keeps dropping

A tyre that loses a little air every week usually has a slow puncture, a leaking valve, a bent or corroded rim bead, or a crack in the rim. A tyre shop can find it in a water tank. See tyre and puncture repair and cracked rim repair. If your car has TPMS sensors, a warning light is your cue to check all four.

Frequently asked questions

How many psi is 2.2 bar?
About 32 psi. 2.0 bar is about 29 psi, 2.4 bar about 35 psi and 2.5 bar about 36 psi. In kPa, 2.2 bar is 220 kPa.
Should I add pressure at the coast or inland?
Use the placard pressures everywhere. A gauge measures pressure above the surrounding air, so driving from the coast to Gauteng makes a cold reading slightly higher. Check again once you arrive and set the tyres to the placard figure cold.
Is nitrogen better than air?
Air is already mostly nitrogen. Nitrogen fill can leak slightly more slowly, but checking the pressure regularly matters far more than what the tyre is filled with.

Related services

Free quote request, no obligation

Request TPMS sensors quotes

Fill in the job card the way a wheel shop would: what is wrong, the wheel size and finish or the vehicle, where you are and how soon. Repairers, tyre shops and suppliers in your area quote you directly.

Job card No. 66604TPMS Sensors

1The job

2The vehicle (optional, it helps the quote)

Your vehicle, from above

-
-
-
-
-
-
Estimate
-

A rule of thumb, not a quote.

3Stage, condition and timing

4Your list (optional)

  1. 01
  2. 02
Up to 12 lines: wheels, tyres, vehicles, machines or supplies.
Needs and options

5Your details

Free and no obligation. By sending you agree that we may share your request with suitable repairers, tyre shops and suppliers. See our privacy policy.

Get free wheel repair quotes