Get free quotes

Free tool

How old are your tyres, and how much tread is left?

Enter the four digit date code from the sidewall to see when the tyre was made and how old it is. Add your tread depth to see what is left before the legal limit.

A tyre on a workshop stand being checked for a puncture

Date code

Tread

Most new car tyres start with roughly 7 to 9 mm of tread; bakkie and off road tyres often more. Use the lowest reading across the tyre.

Age

Made in
–
Age today
–

Tread

Used so far
–
Left to the 1.6 mm wear bars
–
Rough km left at this rate
–

Every tyre carries a date of manufacture on the sidewall: the last four digits of the DOT code, inside a small oval. 2321 means week 23 of 2021. Rubber ages even when a tyre is hardly used, so a spare or a tyre on a car that stands a lot can look fine and still be too old. Tread depth tells you the other half of the story.

Finding the date code

Look for the letters DOT on the sidewall, followed by a string of letters and numbers. The last four digits, often in a slightly raised oval, are the week and the year. The code may be on the inside of the tyre only, so check both sides. A tyre with a three digit code was made before 2000 and should be replaced.

How old is too old

Many tyre makers and vehicle makers advise having tyres inspected every year once they are five years old, and replacing them ten years after manufacture regardless of tread. Signs of ageing are fine cracks in the sidewall or between the tread blocks, a hard feel to the rubber and bulges. Tyres fitted to a vehicle that stands in the sun, a caravan or a trailer often age faster. Ask the fitment centre to check the date on new tyres before they are fitted.

Tread depth and the law

In South Africa the legal minimum is 1 mm of tread depth across the tread. Most tyres have tread wear indicators, small bars in the grooves, at about 1.6 mm. Grip in the wet falls off well before either, which matters in Cape winters and Highveld thunderstorms. Measure in the main grooves at a few places across the tyre and around it: uneven wear points to an alignment or pressure problem.

Frequently asked questions

Should I buy tyres that are a year or two old?
A tyre that has been stored properly, out of the sun and away from heat, is fine for a year or two. Many buyers ask for tyres made within the last year or two. What matters most is the total age at the end of the tyre's working life.
Does the spare wheel need checking?
Yes. Spares are often the oldest tyres on a vehicle. Check the date code and the pressure, and replace a spare that is cracked or older than about ten years.
How do I measure tread depth?
Use a tread depth gauge from any motor spares shop, pushed into the main groove. Measure at the inner, middle and outer grooves and at three or four places around the tyre, and use the lowest reading.

Related services

Free quote request, no obligation

Request tyre fitment quotes

Fill in the job card the way a wheel shop would: what is wrong, the wheel size and finish or the vehicle, where you are and how soon. Repairers, tyre shops and suppliers in your area quote you directly.

Job card No. 61564Tyre Fitment

1The job

2The vehicle (optional, it helps the quote)

Your vehicle, from above

-
-
-
-
-
-
Estimate
-

A rule of thumb, not a quote.

3Stage, condition and timing

4Your list (optional)

  1. 01
  2. 02
Up to 12 lines: wheels, tyres, vehicles, machines or supplies.
Needs and options

5Your details

Free and no obligation. By sending you agree that we may share your request with suitable repairers, tyre shops and suppliers. See our privacy policy.

Get free wheel repair quotes